1998 HEIDELBERG HARRIS MERCURYBack
Get in touch
Telephone: +44 (0)1924 890157
Ref No: 6913
Cut Off: 546mm
Speed: 45000 Copies/Hour
ONE (1) Martin Model EC PLUS-1640A Splicer
The specification apply for one Web Automatic splicing.
Pull roll acceleration.
Press stop station.
Motorized sidelay + 25 mm
Web break detection.
Electric hoist for 998 kg maximum roll weight.
Martin mechanical core shafts.
Dual brake system.
1 - Mercury Four High Tower
The following are the main Features of the Mercury Web offset Perfecting printing unit:
Manually operated drive shaft disengage clutch inside gear case.
Solid steel plate and blanket cylinders with hardened steel bearers. Bodies are corrosion resistant.
Motorized ink and water fountain rollers, provide variable control of ink and water up to maximum speeds.
Motorized on-the-run lateral and circumferential Register control + 3.2 mm on both plate cylinders are actuated from the work side and from the press console.
Blanket cylinder lockups are of reel rod design. - 3 -
Plates are mounted in a narrow gap slot with work side mounted lateral plate side stop.
Quick bearer pressure adjustment with turnbuckles from inside the frames.
Each ink train consists of eight rollers, four of which are rubber-covered, two oscillating nylon-covered vibrators, one nylon-covered distributor, one knurled metering roll, and one hardened fountain roll.
Each unit is equipped for vertical Web application.
Brush dampening system includes chrome pan roller, brush roller, aluminum vibrator roller and insulated stainless steel water pan. Water pan piping to a central point at the base of the unit is provided.
Eight HEIDELBERG HARRIS 102 mm water stops are included with each unit.
Each unit is supplied with one set of covered rollers, printing blankets and HEIDELBERG HARRIS inker wash-up and mounting brackets.
Undercut on plate cylinder is 0,25 mm.
Undercut on blanket cylinder is .1.8 mm.
Drop-down ink fountain with 24 motorized ink keys (Telecolor II).
Control panels are provided on both sides of each unit.
The printing unit gear train is lubricated by a cascading oil system.
Grease header blocks are provided to points that require grease lubrication.
Pneumatic control for ink forms, ink metering rolls, water forms, impression functions.
Lead rolls and brackets for up to 4 white webs or two printed webs under the tower are provided.
ONE (1) Heidelberg Tele-Color® II system with one console
The HEIDELBERG HARRIS Tele-Color® II System consists of the following:
Touch-screen operations, including ink keys and a profile based ink key
Group action and ALL keys controls are included. Ink key positions are represented by LED bar displays.
Storage of eight jobs at the console.
The console is capable of controlling sixteen inkers.
Console, fountain and fountain key assignments are field configurable.
Flip top is mounted on top of console to hold color "OK" sheets.
EIGHT (8) Tele-Color II unit (one per printing couple)
ONE (1) CPU enclosure for system 1™ PLC press control
ONE (1) Heidelberg JF-35 1:2:2 Folder
It is a single width combination folder featuring product flexibility.
Mechanical clutch to disengage the entire folder from the press.
Roll-Top-of-Former (RTF) and folder drive are driven by timing belts.
Heavy-duty spring loaded RTF trolleys with manual throw off and tabloid slitter over former.
Short former with bent beak nose (up to eight webs maximum over former). Manual position adjustment of the short former is provided.
Two part jaw cylinder with provisions for double parallel tucker section
The transfer cylinder is twice the plate cylinder size and contains the pins/cutting
bars and tucker blade section. Standard cylinder is capable of up to six webs
Plate cylinder size cutting cylinder
Half fold lap adjustment + 9.7 mm (.38 in)
533 mm minimum Web width up to 914 maximum Web width
Basic folder includes half fold delivery only
Half fold and optional double parallel deliveries are adjustable
Folder gearing lubricated by circulating oil and metered oil to the cams - 6 -
Electromechanical jam protection is provided
Creeping belt delivery (back bone leading)
Two sets of plate cylinder size driven knurled steel nip rolls. The nips are 16mm wide
Web-up platforms with access steps
ONE (1) Basic bent beak former drilled for air
ONE (1) Time linear perforator
ONE (1) Single cross perforator
ONE (1) Rotary blade 1/4-folder (no double parallel)
ONE (1) Linear compensator - motorized for 2 webs
ONE (1) Platforming to wrap around short former
ONE (1) 6-ft. delivery extension
ONE (1) Manual clutch (disengage lower folder only)
ONE (1) Plunger type Web severer - lower former
ONE (1) HEIDELBERG HARRIS PB3M manual plate bender
ONE (1) HEIDELBERG HARRIS manual plate punch
ONE (1) SPENCER Blower 24107B2 - 150 SCFM @ 3.0 PSIG (50 Hz)
ONE (1) AWS LPA 1200 Air cooler
ONE (1) 64 ACFM Air compressor
ONE (1) Press documentation
ONE (1) System 1 PLC Press Control Package for printing units
Includes programmable controller-based system for control of all PRINT and drive functions.
This control system includes one 3' (915 mm) freestanding console. The System 1 Press Control will manage any number of units, zone control.
One master drive station including: Inch. Slower, Faster, Ready, Stop/Safe buttons, light and flashing Ready light.
Auto accel provides automatic acceleration and deceleration of the press. This is done via a vernier potentiometer on the control panel.
Automatic sequencing can be programmed by the operator to occur in any order and can be manually or automatically initiated.
Ink and water controls provide remote master ink and remote water controls with the added capability to track press speed and provide instantaneous flood.
Motorized circumferential and lateral Register are adjusted by selecting the units to be moved and pressing "Toward/Away" or "Advance/Retard" push buttons for the desired amount of the Register move. Several units may be selected at a time and Register moves can be made in close succession without waiting for the last move to be completed.
Good and gross counters for folder or sheeter. - 5 -
Information display (annunciator) which communicates press operation and fault information.
ONE (1) System 1 - PLC press control package for folder
This press is an ex Heidelberg Showroom demonstration machine, in store in timber packing cases, in new condition.
There is also included and additional to a complete Mercury Four High Tower, as new condition never been installed.